1. Name Of The Medicinal Product
HUMALOG* 100U/ml, solution for injection in vial.
HUMALOG 100U/ml, solution for injection in cartridge.
HUMALOG Pen 100U/ml, solution for injection.
HUMALOG 100U/ml KwikPen, solution for injection.
2. Qualitative And Quantitative Composition
One ml contains 100U (equivalent to 3.5mg) insulin lispro (recombinant DNA origin produced in E. coli).
Vial: Each container includes 10ml equivalent to 1000U insulin lispro.
3 ml cartridge: Each container includes 3ml equivalent to 300U insulin lispro.
HUMALOG Pen 3ml/KwikPen: Each container includes 3ml equivalent to 300U insulin lispro.
For a full list of excipients, see section 6.1.
3. Pharmaceutical Form
Solution for injection.
HUMALOG, HUMALOG Pen and HUMALOG KwikPen are sterile, clear, colourless, aqueous solutions.
4. Clinical Particulars
4.1 Therapeutic Indications
For the treatment of adults and children with diabetes mellitus who require insulin for the maintenance of normal glucose homeostasis. HUMALOG, HUMALOG Pen or HUMALOG KwikPen is also indicated for the initial stabilisation of diabetes mellitus.
4.2 Posology And Method Of Administration
The dosage should be determined by the physician, according to the requirement of the patient.
HUMALOG may be given shortly before meals. When necessary, HUMALOG can be given soon after meals.
HUMALOG preparations should be given by subcutaneous injection or by continuous subcutaneous infusion pump (see section 4.2) and may, although not recommended, also be given by intramuscular injection. If necessary, HUMALOG may also be administered intravenously, for example, for the control of blood glucose levels during ketoacidosis, acute illnesses, or during intraoperative and postoperative periods.
Subcutaneous administration should be in the upper arms, thighs, buttocks, or abdomen. Use of injection sites should be rotated so that the same site is not used more than approximately once a month.
When administered subcutaneously, care should be taken when injecting HUMALOG, HUMALOG Pen or HUMALOG KwikPen to ensure that a blood vessel has not been entered. After injection, the site of injection should not be massaged. Patients must be educated to use the proper injection techniques.
HUMALOG, HUMALOG Pen or HUMALOG KwikPen takes effect rapidly and has a shorter duration of activity (2 to 5 hours) given subcutaneously as compared with soluble insulin. This rapid onset of activity allows a HUMALOG injection (or, in the case of administration by continuous subcutaneous infusion, a HUMALOG bolus) to be given very close to mealtime. The time course of action of any insulin may vary considerably in different individuals or at different times in the same individual. The faster onset of action compared to soluble human insulin is maintained regardless of injection site. As with all insulin preparations, the duration of action of HUMALOG, HUMALOG Pen or HUMALOG KwikPen is dependent on dose, site of injection, blood supply, temperature, and physical activity.
HUMALOG can be used in conjunction with a longer-acting human insulin or oral sulphonylurea agents, on the advice of a physician.
Use of HUMALOG in an insulin infusion pump:
Only certain CE-marked insulin infusion pumps may be used to infuse insulin lispro. Before infusing insulin lispro, the manufacturer's instructions should be studied to ascertain the suitability or otherwise for the particular pump. Read and follow the instructions that accompany the infusion pump. Use the correct reservoir and catheter for the pump. Change the infusion set every 48 hours. Use aseptic technique when inserting the infusion set. In the event of a hypoglycaemic episode, the infusion should be stopped until the episode is resolved. If repeated or severe low blood glucose levels occur, notify your health care professional and consider the need to reduce or stop your insulin infusion. A pump malfunction or obstruction of the infusion set can result in a rapid rise in glucose levels. If an interruption to insulin flow is suspected, follow the instructions in the product literature and if appropriate, notify your health care professional. When used with an insulin infusion pump, HUMALOG should not be mixed with any other insulin.
Intravenous administration of insulin:
Intravenous injection of insulin lispro should be carried out following normal clinical practice for intravenous injections, for example by an intravenous bolus or by an infusion system. Frequent monitoring of the blood glucose levels is required.
Infusion systems at concentrations from 0.1U/ml to 1.0U/ml insulin lispro in 0.9% sodium chloride or 5% dextrose are stable at room temperature for 48 hours. It is recommended that the system is primed before starting the infusion to the patient.
4.3 Contraindications
Hypersensitivity to insulin lispro or to any of the excipients.
Hypoglycaemia.
4.4 Special Warnings And Precautions For Use
Transferring a patient to another type or brand of insulin should be done under strict medical supervision. Changes in strength, brand (manufacturer), type (soluble, isophane, lente, etc.), species (animal, human, human insulin analogue), and/or method of manufacture (recombinant DNA versus animal-source insulin) may result in the need for a change in dosage. For fast-acting insulins, any patient also on basal insulin must optimise dosage of both insulins to obtain glucose control across the whole day, particularly nocturnal/fasting glucose control.
Vials: The shorter-acting HUMALOG should be drawn into the syringe first, to prevent contamination of the vial by the longer-acting insulin. Mixing of the insulins ahead of time or just before the injection should be on advice of the physician. However, a consistent routine must be followed.
Conditions which may make the early warning symptoms of hypoglycaemia different or less pronounced include long duration of diabetes, intensified insulin therapy, diabetic nerve disease, or medications such as beta-blockers.
A few patients who have experienced hypoglycaemic reactions after transfer from animal-source insulin to human insulin have reported that the early warning symptoms of hypoglycaemia were less pronounced or different from those experienced with their previous insulin. Uncorrected hypoglycaemic or hyperglycaemic reactions can cause loss of consciousness, coma, or death.
The use of dosages which are inadequate or discontinuation of treatment, especially in insulin-dependent diabetics, may lead to hyperglycaemia and diabetic ketoacidosis; conditions which are potentially lethal.
Insulin requirements may be reduced in the presence of renal impairment. Insulin requirements may be reduced in patients with hepatic impairment due to reduced capacity for gluconeogenesis and reduced insulin breakdown; however, in patients with chronic hepatic impairment, an increase in insulin resistance may lead to increased insulin requirements.
Insulin requirements may be increased during illness or emotional disturbances.
Adjustment of dosage may also be necessary if patients undertake increased physical activity or change their usual diet. Exercise taken immediately after a meal may increase the risk of hypoglycaemia. A consequence of the pharmacodynamics of rapid-acting insulin analogues is that if hypoglycaemia occurs, it may occur earlier after an injection when compared with soluble human insulin.
If the 40U/ml vial is the product normally prescribed, do not take insulin from a 100U/ml cartridge using a 40U/ml syringe.
HUMALOG should only be used in children in preference to soluble insulin when a fast action of insulin might be beneficial. For example, in the timing of the injection in relation to meals.
Combination of Humalog with pioglitazone:
Cases of cardiac failure have been reported when pioglitazone was used in combination with insulin, especially in patients with risk factors for development of cardiac heart failure. This should be kept in mind if treatment with the combination of pioglitazone and Humalog is considered. If the combination is used, patients should be observed for signs and symptoms of heart failure, weight gain and oedema. Pioglitazone should be discontinued if any deterioration in cardiac symptoms occurs.
4.5 Interaction With Other Medicinal Products And Other Forms Of Interaction
Insulin requirements may be increased by medicinal products with hyperglycaemic activity, such as oral contraceptives, corticosteroids, or thyroid replacement therapy, danazol, beta2 stimulants (such as ritodrine, salbutamol, terbutaline).
Insulin requirements may be reduced in the presence of medicinal products with hypoglycaemic activity, such as oral hypoglycaemics, salicylates (for example, acetylsalicylic acid), sulpha antibiotics, certain antidepressants (monoamine oxidase inhibitors, selective serotonin reuptake inhibitors), certain angiotensin converting enzyme inhibitors (captopril, enalapril), angiotensin II receptor blockers, beta-blockers, octreotide, or alcohol.
The physician should be consulted when using other medications in addition to HUMALOG, HUMALOG Pen or HUMALOG KwikPen.
4.6 Pregnancy And Lactation
Data on a large number of exposed pregnancies do not indicate any adverse effect of insulin lispro on pregnancy or on the health of the foetus/newborn.
It is essential to maintain good control of the insulin-treated (insulin-dependent or gestational diabetes) patient throughout pregnancy. Insulin requirements usually fall during the first trimester and increase during the second and third trimesters. Patients with diabetes should be advised to inform their doctor if they are pregnant or are contemplating pregnancy. Careful monitoring of glucose control, as well as general health, is essential in pregnant patients with diabetes.
Patients with diabetes who are breast-feeding may require adjustments in insulin dose, diet or both.
4.7 Effects On Ability To Drive And Use Machines
The patient's ability to concentrate and react may be impaired as a result of hypoglycaemia. This may constitute a risk in situations where these abilities are of special importance (e.g., driving a car or operating machinery). Patients should be advised to take precautions to avoid hypoglycaemia whilst driving; this is particularly important in those who have reduced or absent awareness of the warning signs of hypoglycaemia or have frequent episodes of hypoglycaemia. The advisability of driving should be considered in these circumstances.
4.8 Undesirable Effects
Hypoglycaemia is the most frequent undesirable effect of insulin therapy that a patient with diabetes may suffer. Severe hypoglycaemia may lead to loss of consciousness and in extreme cases, death. No specific frequency for hypoglycaemia is presented, since hypoglycaemia is a result of both the insulin dose and other factors, e.g., a patient's level of diet and exercise.
Local allergy in patients is common (1/100 to <1/10). Redness, swelling, and itching can occur at the site of insulin injection. This condition usually resolves in a few days to a few weeks. In some instances, this condition may be related to factors other than insulin, such as irritants in the skin cleansing agent or poor injection technique. Systemic allergy, which is rare (1/10,000 to <1/1,000) but potentially more serious, is a generalised allergy to insulin. It may cause a rash over the whole body, shortness of breath, wheezing, reduction in blood pressure, fast pulse, or sweating. Severe cases of generalised allergy may be life-threatening.
Lipodystrophy at the injection site is uncommon (1/1,000 to <1/100).
4.9 Overdose
Insulins have no specific overdose definitions because serum glucose concentrations are a result of complex interactions between insulin levels, glucose availability and other metabolic processes. Hypoglycaemia may occur as a result of an excess of insulin activity relative to food intake and energy expenditure.
Hypoglycaemia may be associated with listlessness, confusion, palpitations, headache, sweating and vomiting.
Mild hypoglycaemic episodes will respond to oral administration of glucose or other sugar or saccharated products.
Correction of moderately severe hypoglycaemia can be accomplished by intramuscular or subcutaneous administration of glucagon, followed by oral carbohydrate when the patient recovers sufficiently. Patients who fail to respond to glucagon must be given glucose solution intravenously.
If the patient is comatose, glucagon should be administered intramuscularly or subcutaneously. However, glucose solution must be given intravenously if glucagon is not available or if the patient fails to respond to glucagon. The patient should be given a meal as soon as consciousness is recovered.
Sustained carbohydrate intake and observation may be necessary because hypoglycaemia may recur after apparent clinical recovery.
5. Pharmacological Properties
5.1 Pharmacodynamic Properties
Pharmacotherapeutic group: Fast-acting human insulin analogue. ATC code: A10A B04.
The primary activity of insulin lispro is the regulation of glucose metabolism.
In addition, insulins have several anabolic and anti-catabolic actions on a variety of different tissues. Within muscle tissue this includes increasing glycogen, fatty acid, glycerol and protein synthesis and amino acid uptake, while decreasing glycogenolysis, gluconeogenesis, ketogenesis, lipolysis, protein catabolism and amino acid output.
Insulin lispro has a rapid onset of action (approximately 15 minutes), thus allowing it to be given closer to a meal (within zero to 15 minutes of the meal) when compared to soluble insulin (30 to 45 minutes before). Insulin lispro takes effect rapidly and has a shorter duration of activity (2 to 5 hours) when compared to soluble insulin.
Clinical trials in patients with Type 1 and Type 2 diabetes have demonstrated reduced postprandial hyperglycaemia with insulin lispro compared to soluble human insulin.
As with all insulin preparations, the time course of insulin lispro action may vary in different individuals or at different times in the same individual and is dependent on dose, site of injection, blood supply, temperature, and physical activity. The typical activity profile following subcutaneous injection is illustrated below.
The above representation reflects the relative amount of glucose over time required to maintain the subject's whole blood glucose concentrations near fasting levels and is an indicator of the effect of these insulins on glucose metabolism over time.
Clinical trials have been performed in children (61 patients aged 2 to 11) and children and adolescents (481 patients aged 9 to 19 years), comparing insulin lispro to human soluble insulin. The pharmacodynamic profile of insulin lispro in children is similar to that seen in adults.
When used in subcutaneous infusion pumps, treatment with insulin lispro has been shown to result in lower glycosylated haemoglobin levels compared to soluble insulin. In a double-blind, crossover study, the reduction in glycosylated haemoglobin levels after 12 weeks dosing was 0.37 percentage points with insulin lispro compared to 0.03 percentage points for soluble insulin (P = 0.004).
In patients with Type 2 diabetes on maximum doses of sulphonylurea agents, studies have shown that the addition of insulin lispro significantly reduces HbA1c compared to sulphonylurea alone. The reduction of HbA1c would also be expected with other insulin products, e.g., soluble or isophane insulins.
Clinical trials in patients with Type 1 and Type 2 diabetes have demonstrated a reduced number of episodes of nocturnal hypoglycaemia with insulin lispro compared to soluble human insulin. In some studies, reduction of nocturnal hypoglycaemia was associated with increased episodes of daytime hypoglycaemia.
The glucodynamic response to insulin lispro is not affected by renal or hepatic function impairment. Glucodynamic differences between insulin lispro and soluble human insulin, as measured during a glucose clamp procedure, were maintained over a wide range of renal function.
Insulin lispro has been shown to be equipotent to human insulin on a molar basis but its effect is more rapid and of a shorter duration.
5.2 Pharmacokinetic Properties
The pharmacokinetics of insulin lispro reflect a compound that is rapidly absorbed and achieves peak blood levels 30 to 70 minutes following subcutaneous injection. When considering the clinical relevance of these kinetics, it is more appropriate to examine the glucose utilisation curves (as discussed in section 5.1).
Insulin lispro maintains more rapid absorption when compared to soluble human insulin in patients with renal impairment. In patients with Type 2 diabetes, over a wide range of renal function, the pharmacokinetic differences between insulin lispro and soluble human insulin were generally maintained and shown to be independent of renal function. Insulin lispro maintains more rapid absorption and elimination when compared to soluble human insulin in patients with hepatic impairment.
5.3 Preclinical Safety Data
In in vitro tests, including binding to insulin receptor sites and effects on growing cells, insulin lispro behaved in a manner that closely resembled human insulin. Studies also demonstrate that the dissociation of binding to the insulin receptor of insulin lispro is equivalent to human insulin. Acute, one-month and twelve-month toxicology studies produced no significant toxicity findings.
Insulin lispro did not induce fertility impairment, embryotoxicity, or teratogenicity in animal studies.
6. Pharmaceutical Particulars
6.1 List Of Excipients
m-cresol (3.15mg/ml), glycerol, dibasic sodium phosphate.7H2O, zinc oxide, water for injections. Hydrochloric acid and sodium hydroxide may be used to adjust pH to 7.0-7.8.
6.2 Incompatibilities
HUMALOG, HUMALOG Pen or HUMALOG KwikPen preparations should not be mixed with insulin produced by other manufacturers or with animal insulin preparations. This medicinal product must not be mixed with other medicinal products except those mentioned in section 6.6.
6.3 Shelf Life
Unopened vials
2 years
Unused cartridges and unused pre-filled pens
3 years
After cartridge insertion, or after first use (vial and prefilled pen)
28 days
6.4 Special Precautions For Storage
Unused cartridge and unused pre-filled pens
Store in a refrigerator (2°C-8°C). Do not freeze. Do not expose to excessive heat or direct sunlight.
After cartridge insertion or first use (pre-filled pen)
Store below 30°C. Do not refrigerate. The pen with the inserted cartridge and the pre-filled pen should not be stored with the needle attached.
Vials
Do not freeze. Do not expose to excessive heat or direct sunlight.
Unopened vials
Store in a refrigerator (2°C - 8°C).
After first use (vials only)
Store in a refrigerator (2°C - 8°C) or below 30°C.
6.5 Nature And Contents Of Container
Vials: The solution is contained in Type I flint glass vials, sealed with butyl or halobutyl stoppers, and secured with aluminium seals. Dimeticone or silicone emulsion may be used to treat the vial stoppers.
Cartridges/HUMALOG Pens: The solution is contained in Type I flint glass cartridges, sealed with butyl or halobutyl disc seals and plunger heads, and are secured with aluminium seals. Dimeticone or silicone emulsion may be used to treat the cartridge plunger and/or the glass cartridge.
HUMALOG Pens: The 3ml cartridges are sealed in a disposable pen injector. Needles are not included.
HUMALOG KwikPen: The 3ml cartridges are sealed in a disposable pen injector, called the 'KwikPen'. Needles are not included.
Not all packs may be marketed.
1 x 10ml HUMALOG vial.
2 x 10ml HUMALOG vials.
5 x (1 x 10ml) HUMALOG vials.
5 x 3ml HUMALOG cartridges for a 3ml pen.
2 x (5 x 3ml) HUMALOG cartridges for a 3ml pen.
5 x 3ml HUMALOG Pens.
2 x (5 x 3ml) HUMALOG Pens.
5 x 3ml HUMALOG 100 U/ml KwikPens.
2 x (5 x 3ml) HUMALOG 100 U/ml KwikPens.
6.6 Special Precautions For Disposal And Other Handling
Instructions for use and handling
Any unused product or waste material should be disposed of in accordance with local requirements.
HUMALOG Vials
The vial is to be used in conjunction with an appropriate syringe (100 U markings).
a) Preparing a dose
Inspect the HUMALOG solution. It should be clear and colourless. Do not use HUMALOG if it appears cloudy, thickened, or slightly coloured or if solid particles are visible.
i) HUMALOG
1. Wash your hands.
2. If using a new vial, flip off the plastic protective cap, but do not remove the stopper.
3. If the therapeutic regimen requires the injection of basal insulin and HUMALOG at the same time, the two can be mixed in the syringe. If mixing insulins, refer to the instructions for mixing that follow in section (ii) and section 6.2.
4. Draw air into the syringe equal to the prescribed HUMALOG dose. Wipe the top of the vial with an alcohol swab. Put the needle through the rubber top of the HUMALOG vial and inject the air into the vial.
5. Turn the vial and syringe upside down. Hold the vial and syringe firmly in one hand.
6. Making sure the tip of the needle is in the HUMALOG, withdraw the correct dose into the syringe.
7. Before removing the needle from the vial, check the syringe for air bubbles that reduce the amount of HUMALOG in it. If bubbles are present, hold the syringe straight up and tap its side until the bubbles float to the top. Push them out with the plunger and withdraw the correct dose.
8. Remove the needle from the vial and lay the syringe down so that the needle does not touch anything.
ii) Mixing HUMALOG with longer-acting Human Insulins (see section 6.2)
1. HUMALOG should be mixed with longer-acting human insulins only on the advice of a doctor.
2. Draw air into the syringe equal to the amount of longer-acting insulin being taken. Insert the needle into the longer-acting insulin vial and inject the air. Withdraw the needle.
3. Now inject air into the HUMALOG vial in the same manner, but do not withdraw the needle.
4. Turn the vial and syringe upside down.
5. Making sure the tip of the needle is in the HUMALOG, withdraw the correct dose of HUMALOG into the syringe.
6. Before removing the needle from the vial, check the syringe for air bubbles that reduce the amount of HUMALOG in it. If bubbles are present, hold the syringe straight up and tap its side until the bubbles float to the top. Push them out with the plunger and withdraw the correct dose.
7. Remove the needle from the vial of HUMALOG and insert it into the vial of the longer-acting insulin. Turn the vial and syringe upside down. Hold the vial and syringe firmly in one hand and shake gently. Making sure the tip of the needle is in the insulin, withdraw the dose of longer-acting insulin.
8. Withdraw the needle and lay the syringe down so that the needle does not touch anything.
b) Injecting a dose
1. Choose a site for injection.
2. Clean the skin as instructed.
3. Stabilise the skin by spreading it or pinching up a large area. Insert the needle and inject as instructed.
4. Pull the needle out and apply gentle pressure over the injection site for several seconds. Do not rub the area.
5. Dispose of the syringe and needle safely.
6. Use of the injection sites should be rotated so that the same is not used more than approximately once a month.
c) Mixing insulins
Do not mix insulin in vials with insulin in cartridges. See section 6.2.
HUMALOG cartridges
HUMALOG cartridges are to be used with a CE marked pen as recommended in the information provided by the device manufacturer.
a) Preparing a dose
Inspect the HUMALOG solution. It should be clear and colourless. Do not use HUMALOG if it appears cloudy, thickened, or slightly coloured, or if solid particles are visible.
The following is a general description. The manufacturer's instructions with each individual pen must be followed for loading the cartridge, attaching the needle, and administering the insulin injection.
b) Injecting a dose
1. Wash your hands.
2. Choose a site for injection.
3. Clean the skin as instructed.
4. Remove outer needle cap.
5. Stabilise the skin by spreading it or pinching up a large area. Insert the needle as instructed.
6. Press the knob.
7. Pull the needle out and apply gentle pressure over the injection site for several seconds. Do not rub the area.
8. Using the outer needle cap, unscrew the needle and dispose of it safely.
9. Use of injection sites should be rotated so that the same site is not used more than approximately once a month.
c) Mixing insulins
Do not mix insulin in vials with insulin in cartridges. See section 6.2.
HUMALOG Pens (excluding Kwikpen)
a) Preparing a dose
1. Inspect the HUMALOG Pen solution.
It should be clear and colourless. Do not use HUMALOG Pen if it appears cloudy, thickened, or slightly coloured, or if solid particles are visible.
2. Put on the needle.
Wipe the rubber seal with alcohol. Remove the paper tab from the capped needle. Screw the capped needle clockwise onto the pen until it is tight. Hold the pen with needle pointing up and remove the outer needle cap and inner needle cover.
3. Priming the pen (check insulin flow).
(a) The arrow should be visible in the dose window. If the arrow is not present, turn the dose knob clockwise until the arrow appears and notch is felt or visually aligned.
(b) Pull dose knob out (in direction of the arrow) until a '0' appears in the dose window. A dose cannot be dialled until the dose knob is pulled out.
(c) Turn dose knob clockwise until a '2' appears in the dose window.
(d) Hold the pen with needle pointing up and tap the clear cartridge holder gently with your finger so any air bubbles collect near the top. Depress the injection button fully until you feel or hear a click. You should see a drop of insulin at the tip of the needle. If insulin does not appear, repeat the procedure until insulin appears.
(e) Always prime the pen (check the insulin flow) before each injection. Failure to prime the pen may result in an inaccurate dose.
4. Setting the dose.
(a) Turn the dose knob clockwise until the arrow appears in the dose window and a notch is felt or visually aligned.
(b) Pull the dose knob out (in the direction of the arrow) until a '0' appears in the dose window. A dose cannot be dialled until the dose knob is pulled out.
(c) Turn the dose knob clockwise until the dose appears in the dose window. If too high a dose is dialled, turn the dose knob backward (anti-clockwise) until the correct dose appears in the window. A dose greater than the number of units remaining in the cartridge cannot be dialled.
b) Injecting a dose
1. Wash your hands.
2. Choose a site for injection.
3. Clean the skin as instructed.
4. Remove outer needle cap.
5. Stabilise the skin by spreading it or pinching up a large area. Insert the needle as instructed.
6. Press the injection button down with the thumb (until you hear or feel a click); wait 5 seconds.
7. Pull the needle out and apply gentle pressure over the injection site for several seconds. Do not rub the area.
8. Immediately after an injection, use the outer needle cap to unscrew the needle. Remove the needle from the pen. This will ensure sterility, and prevent leakage, re-entry of air, and potential needle clogs. Do not reuse the needle. Dispose of the needle in a responsible manner. Needles and pens must not be shared.
The prefilled pen can be used until it is empty. Please properly discard or recycle.
9. Replace the cap on the pen.
10. Use of injection sites should be rotated so that the same site is not used more than approximately once a month.
11. The injection button should be fully depressed before using the pen again.
c) Mixing insulins
Do not mix insulin in vials with insulin in cartridges. See section 6.2.
HUMALOG KwikPen
Inspect the HUMALOG solution. It should be clear and colourless. Do not use HUMALOG if it appears cloudy, thickened, or slightly coloured or if solid particles are visible.
a) Handling of the pre-filled pen
Before using the KwikPen the user manual included in the package leaflet must be read carefully. The KwikPen has to be used as recommended in the user manual.
b) Mixing insulins
Do not mix insulin in vials with insulin in cartridges. See section 6.2.
7. Marketing Authorisation Holder
Eli Lilly Nederland B.V., Grootslag 1-5, 3991 RA Houten, The Netherlands.
8. Marketing Authorisation Number(S)
HUMALOG vials | |
1 x 10ml HUMALOG vial: | EU/1/96/007/002 |
2 x 10ml HUMALOG vials: | EU/1/96/007/020 |
5 x (1 x 10ml) HUMALOG vials: | EU/1/96/007/021 |
HUMALOG cartridges | |
5 x 3ml HUMALOG cartridges for a 3ml pen: | EU/1/96/007/004 |
2 x (5 x 3ml) HUMALOG cartridges for a 3ml pen: | EU/1/96/007/023 |
HUMALOG Pens | |
5 x 3ml HUMALOG Pens: | EU/1/96/007/015 |
2 x (5 x 3ml) HUMALOG Pens: | EU/1/96/007/026 |
HUMALOG KwikPen | |
5 x 3ml HUMALOG 100 U/ml KwikPen: | EU/1/96/007/031 |
2 x (5 x 3ml) HUMALOG 100 U/ml KwikPen: | EU/1/96/007/032 |
9. Date Of First Authorisation/Renewal Of The Authorisation
Date of first authorisation: 30 April 1996
Date of last renewal: 30 April 2006
10. Date Of Revision Of The Text
17 February 2011
LEGAL CATEGORY
POM (United Kingdom)
*HUMALOG (insulin lispro) and KWIKPEN are trademarks of Eli Lilly and Company. HLG37M
No comments:
Post a Comment